Bears On Bikes

Elective Adventure

Get together with your den, pack, or family to go on a bike ride. In this Adventure, you’ll learn what to wear to ride your bike safely and some basic maintenance. Then get ready for a bike ride. Grab your helmet, check your tires, and take a buddy to head out on another Cub Scout Adventure.  

Requirements

Show how to properly wear a bicycle helmet.
Helmet Relay
LocationOutdoor
Energy 4
Supply List2
Prep Time2

Cub Scouts demonstrate proper helmet fitting during a relay game. 

  • Bike helmet, one per Cub Scout 
  • Helmet Safety Checklist found in Additional Resources 

Before the meeting: 

  1. Remind parents and legal guardians that Cub Scouts will need to bring their bike helmet to the den meeting.  
  2. Secure additional adult supervision. 
  3. Print a copy of the Helmet Safety Checklist for each relay team. 
  4. Become familiar with the proper fitting of a bike helmet by reviewing “Easy Steps to Properly Fit a Bicycle Helmet.” 
  5. Identify a safe area free of obstacles for the Cub Scouts to run a relay race.  
  6. The day before the meeting remind everyone in the den of the date, time, and location, and to bring their helmets and to wear what they would wear on a bike ride. 
  7. If anyone is going to borrow a helmet, disinfect the helmet with an over-the-counter disinfectant spray. 

During the meeting: 

  1. Gather the Cub Scouts and inform them that when we ride bikes wearing a helmet is one of the most important safety gear we have.  A bicycle crash can happen at any time. A properly fitted bicycle helmet reduces the risk of head injury. More children aged 5 to 14 go to hospital emergency rooms for injuries associated with bicycles than with any other sport. Many of these injuries involve the head. Just like any safety gear, in order for it to work properly you have to wear it properly.   
  2. Demonstrate to know that your bike helmet is fitted properly and if it doesn’t how to adjust it. 
    • Your helmet should fit snuggly. While it is sitting flat on top of your head, make sure the helmet doesn’t rock side to side. Sizing pads come with new helmets; use the pads to securely fit to your head. Mix or match the sizing pads for the greatest comfort. In your child’s helmet, remove the padding when your child’s head grows. If the helmet has a universal fit ring instead of sizing pads, adjust the ring size to fit the head. 
    • The helmet should sit level on your head and low on your forehead—one or two finger-widths above your eyebrow. 
    • Center the left buckle under the chin. On most helmets, the straps can be pulled from the back of the helmet to lengthen or shorten the chin straps. This task is easier if you take the helmet off to make these adjustments. 
    • Adjust the slider on both straps to form a “V” shape under, and slightly in front of,  the ears.  Lock the  slider if possible. 
    • Buckle your chin strap. Tighten the strap until it is snug, so that no more than one or two fingers fit under the strap. 
    • A. Does your helmet fit right? Open your mouth wide…big yawn! The helmet should pull down on the head. If not, refer back to step 5 and tighten the chin strap. B.  Does your helmet rock back more than two fingers above the eyebrows? If so, unbuckle, shorten the front strap by moving the slider forward.  Buckle, retighten the chin strap, and test again. C.  Does your helmet rock forward into your eyes? If so, unbuckle, tighten the back strap by moving the slider back toward the ear. Buckle, retighten the chin strap, and test again. D.  Roll the rubber band down to the buckle. All four straps must go through the rubber band and be close to the buckle to prevent the buckle from slipping. 
  3. Separate Cub Scouts into two teams. Assign an adult to each team. 
  4. Have Cub Scouts form two separate lines. 
  5. Adults stand about 5 yards away with the helmets of the Cub Scouts on their team.  
  6. When you say go, one player from each team runs run to their helmet, puts it on and checks to make sure it is on correctly.  
  7. Using the checklist, the adult checks the fit. Once the helmet fits properly, the Cub Scout runs back to their team, with their helmet on, and tags the next player.  
  8. Continue until all Cub Scouts have finished. 
  9. The team that gets their helmets on properly and is sitting  first wins.  

Helmet Safety Checklist

Decide what you should wear when riding a bike.
Dress The Cub Scout
LocationOutdoor
Energy 3
Supply List3
Prep Time3

Cub Scouts learn proper bike attire by playing a game. 

  • Chalk 
  • Various pieces of appropriate and inappropriate clothing for bike riding, for example: 
    • Sneakers 
    • Socks 
    • Sandals 
    • Flip flops 
    • T-shirt 
    • Bicycle helmet 
    • Big baggy pants 
    • Shorts 
    • Strap to tie off bottom of pants 
    • Baseball cap 
    • Black jacket 
    • Orange hoodie 
    • Knee pads 
    • Elbow pads 
    • Wool cap 
  • Orange safety cones 

Before the meeting: 

  1. Collect and gather needed supplies. 
  2. Place the clothes in a pile off to the side.  
  3. Set up orange safety cones to block off meeting space area. 
  4. Draw a stick figure of a Cub Scout on the sidewalk or driveway. 

During the meeting: 

  1. Tell Cub Scouts that they will be dressing the Cub Scout in appropriate clothing for riding a bike. They are to each pick out one piece of clothing from the pile and place it on the drawn Cub Scout. The Cub Scout should be totally dressed. 
  2. When they are done, point out each piece of clothing and ask why that piece was chosen.
Demonstrate proper hand signals.
Bear Says
LocationOutdoor
Energy 3
Supply List1
Prep Time1

Cub Scouts learn and demonstrate proper biking hand signals by playing “Bear Says.” 

  • No additional supplies 

Before the meeting: 

  1. Set up meeting space for Cub Scouts to have room to move about freely. 
  2. Understand the rules for playing Simon Says. The adult leading the activity is “Bear.” The Cub Scouts gather around Bear, who gives instructions by saying, “Bear says…” telling the Cub Scouts to perform a physical action. For this activity, it will be the different hand signals for cycling.  For example, “Bear says left turn,” “Bear says stop.” Each Cub Scout must perform the action. If Bear leaves out “Bear says” before giving instruction, anyone who performed the action or gave the wrong signal is out! 
  3. Become familiar with the hand signals for cycling.  
    • To signal a left turn, fully extend your left arm out to your side. Make this signal approximately 100 feet before you turn to alert others so that you can get your hands back onto your bike as you turn. 
    • There are two ways to signal a right turn. The first, and most frequently used, is to simply extend your right arm out to your side – just as you would for a left turn, on the opposite side.  Another option to signal a right turn, is to extend your left arm out to the side and turn your arm up at a 90-degree angle. Whichever method you use, be sure to make the signal about 100 feet before turning, and leave your arm extended for about 3 seconds. 
    • To indicate that you are stopping or slowing down, simply extend your left arm out, and bend your arm down at a 90-degree angle, with your hand open. 

During the meeting: 

  1. Explain to Cub Scouts that when riding a bicycle, it is important for those around to know which way they will be going when turning and when they are stopping.  
  2. Demonstrate the hand signals for left turn, right turn (both options), and stop. 
  3. To practice the signs, they will be playing “Bear Says” which is like Simon Says but only using Bear. 
  4. Have Cub Scouts stand up. Practice the following signs calling out “Bear Says” or just the sign.: 
    • Left Turn 
    • Right Turn 
    • Stopping 
    • Alternate Right Turn 
  5. Do this for a few rounds until you feel confident Cub Scouts know the hand signals.  
Left Turn, Right Turn
LocationOutdoor
Energy 4
Supply List1
Prep Time1

Cub Scouts learn and practice bike hand signals.

  • Orange safety cones 

Before the meeting: 

  1. Using orange safety cones, set up meeting space with a start and finish line 10 yards in length. 
  2. Become familiar with the hand signals for cycling.  
    • To signal a left turn, fully extend your left arm out to your side. Make this signal approximately 100 feet before you turn to alert others so that you can get your hands back onto your bike as you turn. 
    • There are two ways to signal a right turn. The first, and most frequently used, is to simply extend your right arm out to your side – just as you would for a left turn, on the opposite side.  Another option to signal a right turn, is to extend your left arm out to the side and turn your arm up at a 90-degree angle. Whichever method you use, be sure to make the signal about 100 feet before turning, and leave your arm extended for about 3 seconds. 
    • To indicate that you are stopping or slowing down, simply extend your left arm out, and bend your arm down at a 90-degree angle, with your hand open. 

During the meeting: 

  1. Explain to Cub Scouts that when riding a bicycle, it is important for those around to know which way they will be going when turning and when they are stopping.  
  2. Demonstrate the hand signals for left turn, right turn (both options), and stop. 
  3. Explain to Cub Scouts that they will be walking from the starting line to the finish line. As they walk, you will be calling out bicycle hand signals. They are to do the hand signal and complete the action. Have Cub Scouts gather at the starting line. 
    • Have Cub Scouts  start walking toward you.  
    • Call out the hand signals at various intervals. 
      • ”Left turn”, Cub Scouts are to stick out their left arm, do a counter-clockwise turn and keep walking. 
      • ”Right turn,” Cub Scouts are to stick out their right arm,  do a clockwise turn, and keep walking.  
      • ”Stop,” Cub Scouts are to bend their arm in the stop position and stop walking 
    • Any Cub Scout who does not stop, has to go back to the starting line.  
  4. Cub Scout who reaches the end first wins.  
Demonstrate how to adjust saddle height.
Saddle Up
LocationOutdoor
Energy 2
Supply List2
Prep Time4

Cub Scouts demonstrate how to adjust a bike seat.  

  • Bike with an adjustable seat 

Before the meeting: 

  1. Set up meeting space with a bicycle with an adjustable seat. 

During the meeting: 

  1. Have Cub Scouts surround the bike as you demonstrate how to adjust the seat.  
  2. Explain to the Cub Scouts that you know your bike seat is at the right height if you can keep your hips stable on the bike instead of rocking them back and forth to reach the bottom of the pedal stroke. When your foot is at the lowest point while pedaling, you want your knee to be slightly bent, not locked out completely straight or curved. 
  3. Using the EDGE method do the following: 
    • E: Explain how to adjust the seat: “You pull the lever under the seat away from the bar, and it should loosen.” 
    • D: Demonstrate how to adjust the seat, while you are explaining how to do it.  
    • G: Guide each Cub Scout by giving them the ability to try to do it on their own and assisting them if they need it.  
    • E: Enable them to take a turn adjusting their own seat.  
  4. Have each Cub Scout adjust the seat of the bike so that is proper for them. 
Demonstrate how to operate brakes.
Brake Test
LocationOutdoor
Energy 5
Supply List4
Prep Time4

Cub Scouts demonstrate how to operate their bicycle brakes.

  • Bike, one per Cub Scout 
  • Helmet, one per Cub Scout 
  • Orange safety cones 
  • Chalk 

Before the meeting: 

  1. Find a safe are free of obstacles to conduct the activity.  
  2. Mark off area with orange safety cones. 
  3. A day prior to the meeting remind Cub Scouts, parents, and legal guardians to bring their bikes, bike helmets, and other safety gear to the meeting.  
  4. Draw a start and stop line on the parking lot in chalk.  

During the meeting: 

  1. Review bicycle helmet safety and have Cub Scouts put on their helmets.  
  2. Have Cub Scouts line up along the start line. They will complete this activity one at a time. 
  3. Tell Cub Scout that when you say “GO!” they will begin pedaling toward the finish line. When you say “STOP!” they are to use their brakes and stop. Explain that they will start and stop several times on their way to the finish line. Remind them that they should use their “stop” hand signal.  
  4. Say “GO!” so that Cub Scout will start pedaling. After they’ve pedaled for a bit, say “STOP!”  
  5. Repeat until everyone is across the finish line.  
Learn how to use a pump to inflate your tires. Discuss why riding with low-pressure or flat tires is unsafe and can cause damage to your bike.
Pump It Up
LocationOutdoor
Energy 3
Supply List4
Prep Time3

Cub Scouts learn how to pump up their tires safely.

  • Bike tire pump 
  • Tire pressure gauge, if bike pump does not have one  
  • Bike 

Before the meeting: 

  1. Set up meeting space with a bicycle.  
  2. Become familiar with how to use the bike pump you will be using by reading the instruction manual for that bike pump. 
  3. Identify on the tire where the proper PSI (Pounds Per Square Inch) for the tire. 
  4. Make sure the tire needs air by releasing air out of the tire so it is below the recommended PSI. 

 During the meeting: 

  1. Have Cub Scouts surround the bike as you demonstrate how to pump the tires.  
  2. Show Cub Scouts that on every bike tire there is a place that indicates how much air should be in the tire.  Explain that air in bike tires expands and contracts with weather conditions.  Air expands when it is hot and contracts when it is cold so you always should check your tire pressure before riding. 
  3. Show Cub Scouts on the tire where the PSI is.  Explain to Cub Scouts that tire pressure is measured in PSI which stands for pounds per square inch.  For example, if it says 60 PSI that means that the pressure pushing out on the tire is equal to 60 pounds for every 1 inch by 1 inch square on the tire.  That would be like 7 gallons of milk stacked on top of each other placed on your toe. 
  4. Demonstrate how to check the tire pressure and compare it to what the pressure should be. 
  5. Demonstrate how to pump the tire up to the proper pressure. 
  6. Release the pressure in the tire and allow each Cub Scout to check the pressure and pump air into the tire to reach the proper pressure.  
With your family, den, or pack, follow the buddy system and go on a 30-minute bike ride.
Bear Bike Ride
LocationIndoor
Energy 5
Supply List5
Prep Time5

Cub Scouts go on a 30-minute bike ride while using the buddy system.

  • Cub Scouts and adults bring their Cub Scout Six Essentials 
  • Cub Scouts and adults bring their own bike, bike helmet, and other safety gear. 
  • For those who do not have their own bike or bike helmet arrange for bikes and helmets to be barrowed. 
  • Activity Consent Form 

Check with your pack and other den leader to see if they are planning a bike ride so you can coordinate efforts. 

Before the meeting: 

  1. If you have not already done so, become familiar with the Bicycle Safety guidelines found on the BSA Sports and Activities page.   
  2. Identify a bike bath that is away from traffic.   
  3. A week before the meeting remind Cub Scouts, parents, and legal guardians, of the date, time, and location of the meeting and that everyone will need to bring their bike, safety gear, and Cub Scout Six Essentials.  
  4. The day before the meeting remind Cub Scouts, parents, and legal guardians of the date, time, and location of the meeting and that everyone will need to bring their bike, safety gear, and Cub Scout Six Essentials.  
  5. Make sure everyone completes an activity consent form.  

During the meeting: 

  1. Have Cub Scouts buddy up with one another. A group of 3 will also work. 
  2. Have Cub Scouts properly put on their helmets and check for closed-toe shoes.  
  3. Explain the route they will take during their bike ride.  
  4. Go on a 30-minute bike ride.  
Print

Prior to any activity, use the BSA SAFE Checklist to ensure the safety of all those involved.  

All participants in official BSA Scouting activities should become familiar with the Guide to Safe Scouting and applicable program literature or manuals.   

Be aware of state or local government regulations that supersede BSA practices, policies, and guidelines.  

To assist in the safe delivery of the program you may find specific safety items that are related to requirements for the Adventure. 

Before starting this Adventure: 

During the Adventure: 

  • Conduct an “ABC Quick Check” on the bicycles before riding.  The Pedestrian and Bicycle Information Center has a checklist for air, brakes, and cranks, chain, and cogs.