Earth Rocks

Elective Adventure

Rocks and minerals are more than just things that lie in the ground. Yes, they help form our planet, but people also use them to create things that make our lives easier. In this Adventure, you’ll dig into the world of rocks and minerals and discover some surprises about the science of geology — like how the ground beneath your feet is constantly on the move.

Requirements

Examine the three types of rocks, sedimentary, igneous, and metamorphic.
Crayon Rock Formation
LocationIndoor
Energy 2
Supply List4
Prep Time2

Using crayons to recreate the formation process of igneous, sedimentary, and metamorphic rocks.

  • Crayons, several of each in four different colors
  • Crayon or pencil sharpener
  • 4 containers for holding crayon shavings
  • Three 6″ x 6″ piece of aluminum foil for each Cub Scout
  • Craft stick or another disposable stirrer, one for each Cub Scout
  • Mug, one for each Cub Scout
  • Boiling water
  • Table covering

Before the meeting:

  1. Create crayon shavings and cut the aluminum foil. Cover the table.
  2. Set up meeting space for Cub Scouts with space to do the activity .

During the meeting:

  1. Inform the Cub Scouts of the three types of rocks, igneous, sedimentary, and metamorphic. Tell them that they will be using crayon shavings to simulate the different types of rock.
    • Igneous rock is any rock made by cooling magma (hot, molten material that flows under the Earth’s surface) or lava (molten rock that comes out of a volcano). Examples of igneous rock include basalt, granite, and obsidian.
    • Sedimentary rock is formed in layers. Sediment is gravel, sand, clay, or soil that settles and hardens out of water in riverbeds, ponds, lakes, and oceans. Sediment may contain shells and skeletons. If the sediment was originally sand, it becomes sandstone. Clay turns into shale. Shells and skeletons make limestone. Small pebbles and sand form conglomerate.
    • Metamorphic rock has been through a process much like baking. (Meta means “changed,” and morphic means “form.”) The change is caused by intense heat and great pressure deep in the Earth. Under these conditions, sedimentary limestone becomes marble. Sedimentary sandstone turns into quartzite. Igneous granite changes into gneiss (pronounced “nice”).
  2. To make an igneous crayon rock:
    • Take a square of aluminum foil and pile all four colors of shavings in the center.
    • Fold up the side of the aluminum foil to make a boat. Place in mug.
    • Ask an adult to pour boiling water into the mug and float the boat in the hot water until all the crayon sediments have melted.
    • Then take the craft stick and stir the shavings until they are all mixed together. Remove the boat and let the crayon cool and solidify.
  3. To create sedimentary rock:
    • Take one of the aluminum foil squares and sprinkle each of the colors of shavings into the middle of the square, one at a time so they will form the layers.
    • Fold the aluminum foil up tightly around the shavings and then compress it.
    • Carefully unfold the foil and remove the sedimentary rock with care as this is the most brittle of the rocks that you are making.
  4. To create the metamorphic rock:
    • Take a square of aluminum foil and pile all four colors of shavings in the center.
    • Fold up the sides of the aluminum foil to make a boat.
    • Have an adult pour boiling water into a mug and float the boat in the hot water for 15 to 20 seconds, just until the shavings have started to melt.
    • Remove the boat and fold the foil in half so that the shavings are compressed a bit.
    • Let it cool and solidify and then open the foil and remove the metamorphic rock.
Rock Classification
LocationIndoor
Energy 2
Supply List4
Prep Time2

Cub Scouts learn the three types of rocks and how to identify them.

  • Bag of rocks containing the three types: igneous, sedimentary, and metamorphic
  • Three pieces of 8 ½” x 11” paper
  • Magnifying glass, one for each Cub Scout

Before the meeting:

  1. Purchase a bag of rocks that contains igneous, sedimentary, or metamorphic rocks. Look at stores that sell garden rocks, Amazon, or visit any museum that has a rock collection.
  2. Set up a meeting space to lay out the rocks for Cub Scouts to examine.
  3. Set up an area with 3 pieces of paper, one labeled igneous, one labeled sedimentary, and one labeled metamorphic. Cub Scouts will be examining rocks and placing them on the paper that they believe best describes the type of rock.

During the meeting:

  1. Gather Cub Scouts and share that they will be sorting rocks into types. Explain the types of rocks:
    • Igneous rock is any rock made by cooling magma (hot, molten material that flows under the Earth’s surface) or lava (molten rock that comes out of a volcano). Examples of igneous rock include basalt, granite, and obsidian.
    • Sedimentary rock is formed in layers. Sediment is gravel, sand, clay, or soil that settles and hardens out of water in riverbeds, ponds, lakes, and oceans. Sediment may contain shells and skeletons. If the sediment was originally sand, it becomes sandstone. Clay turns into shale. Shells and skeletons make limestone. Small pebbles and sand form conglomerate.
    • Metamorphic rock has been through a process much like baking. (Meta means “changed,” and morphic means “form.”) The change is caused by intense heat and great pressure deep in the Earth. Under these conditions, sedimentary limestone becomes marble. Sedimentary sandstone turns into quartzite. Igneous granite changes into gneiss (pronounced “nice”).
  2. Ask Cub Scouts to use their magnifying glass and separate their rocks into the three types of rocks igneous Rock, sedimentary rock, and metamorphic rock and place on the labeled piece of paper.
  3. When finished, have Cub Scouts share their results.
Rock Expert
LocationIndoor
Energy 1
Supply List1
Prep Time5

Invite a Rockhound or geologist to a den meeting.

  • No additional supplies

Before the meeting:

  1. One to two weeks prior to the den meeting, research and invite a Rockhound or geologist from your area to your den meeting. Let them know that the group consists of 3rd graders and to discuss the three types of rocks, igneous, sedimentary, and metamorphic. Ask the speaker to bring rock samples.
  2. Set up meeting space for the speaker.

During the meeting:

  1. Introduce the speaker.
  2. Encourage Cub Scouts to ask questions.
    • How can we tell how a rock was formed by looking at it?
    • How are minerals and rocks different? How are they similar?
    • Why is the rock cycle important to how the earth looks today?

After the meeting:

  1. Send a thank you note to the speaker.
Rock Hunt
LocationOutdoor with Travel
Energy 4
Supply List3
Prep Time5

Cub Scouts hunt for rocks to identify and categorize.

  • Egg carton or any divided container to collect the rocks, one for each Cub Scout
  • Magnifying glass, one for each Cub Scout
  • Rock Types found in Additional Resources
  • Clipboard, one for each Cub Scout
  • Printer
  • Cub Scout Six Essentials
  • Activity Consent Form

Before the meeting:

  1. Locate an area where Cub Scouts can collect rocks. It can be a park, a backyard, a business that sells stones for landscaping or building materials, or an official rock hounding site.
  2. Contact parents and legal guardians to let them know Cub Scouts must wear comfortable clothes, shoes, and their Cub Scout Six Essentials. Remind them of the meeting location date and time and to bring a completed Activity Consent Form .
  3. Print a copy of Rock Types for each Cub Scout and an extra one for yourself.

During the meeting:

  1. At the meeting location, gather Cub Scouts and share that they will be rock hounding or searching for rocks. They will be looking for three types of rocks. Using the Rock Types worksheet explain the following:
    • Igneous rock is any rock made by cooling magma (hot, molten material that flows under the Earth’s surface) or lava (molten rock that comes out of a volcano). Examples of igneous rock include basalt, granite, and obsidian.
    • Sedimentary rock is formed in layers. Sediment is gravel, sand, clay, or soil that settles and hardens out of water in riverbeds, ponds, lakes, and oceans. Sediment may contain shells and skeletons. If the sediment was originally sand, it becomes sandstone. Clay turns into shale. Shells and skeletons make limestone. Small pebbles and sand form conglomerate.
    • Metamorphic rock has been through a process much like baking. (Meta means “changed,” and morphic means “form.”) The change is caused by intense heat and great pressure deep in the Earth. Under these conditions, sedimentary limestone becomes marble. Sedimentary sandstone turns into quartzite. Igneous granite changes into gneiss (pronounced “nice”).
  2. Hand out egg cartons. Explain to Cub Scouts that they are to search for rocks and place them in their egg carton.
  3. Once they have collected their rocks, provide each Cub Scout a magnifying glass and a clipboard with the Rock Types worksheet to the clipboard.
  4. Ask Cub Scouts to use their magnifying glass and separate their rocks into the three types of rocks igneous Rock, sedimentary rock, and metamorphic rock based on the worksheet.
  5. Have Cub Scouts share their results.

Rock Types

Find a rock, safely break it apart and examine it.
Break A Geode
LocationOutdoor
Energy 3
Supply List5
Prep Time5

Cub Scouts break apart a geode and examine.

  • Geode for each Cub Scout and one for yourself
  • Safety glasses, one for each Cub Scout
  • Rocks
  • Geology hammer, enough to share
  • Old sock, one for each Cub Scout and geode
  • Magnifying glass, one for each Cub Scout

Before the meeting:

  1. Purchase geodes online or at a local rock store.
  2. Practice opening a geode by placing it in a sock and lightly tapping.
  3. Set up a place where Cub Scouts can safely use a hammer and chisel on their geode.

During the meeting:

  1. Explain to Cub Scouts that they will be breaking apart a special type of rock called a geode. Geodes are spherical rocks that contain hollow cavities lined with crystals .
  2. Pass out safety glasses and ask them to put them on.
  3. Share your open geode and demonstrate how you opened it using a sock.
  4. Have Cub Scouts place their geode in a sock and hit it very lightly with a hammer.
  5. Have Cub Scouts then use a magnifying glass to study the geode.
  6. Have the Cub Scouts share what they found.
Let’s Go Rock Hunting
LocationTravel
Energy 5
Supply List5
Prep Time3

Cub Scouts break apart rocks.

  • Bag for collecting rocks, one for each Cub Scout
  • Safety glasses, one for each Cub Scout
  • Rocks
  • Geology hammer, enough to share
  • Chisel, enough to share
  • Rag, one for each Cub Scout
  • Magnifying glass, one for each Cub Scout
  • Cub Scout Six Essentials
  • Activity Consent Form

Before the meeting:

  1. Locate an area where Cub Scouts can collect rocks. It can be a park, a backyard, a business that sells stones for landscaping or building materials, or an official rock hounding site.
  2. Contact parents and legal guardians to let them know Cub Scouts must wear comfortable clothes, close toe shoes, and their Cub Scout Six Essentials. Remind them of the meeting location date and time and to bring a completed Activity Consent Form .
  3. Set up a place where Cub Scouts can safely use a hammer and chisel on their rocks.

During the meeting:

  1. Explain to Cub Scouts that they are searching for rocks that they will break apart and examine. Ask them to find at least two different rocks. They are to put their rocks into their bag.
  2. Allow Cub Scouts time to find their two rocks.
  3. Gather at the designated place to break open the rocks. Pass out safety glasses and ask them to put them on.
  4. Distribute rags. Tell Cub Scouts to wrap their rocks in the rag before breaking apart the rocks with a hammer and chisel.
  5. Have Cub Scouts break open their rocks and then use a magnifying glass to study the rock.
  6. Have the Cub Scouts share what they found.
Make a mineral test kit and test minerals according to the Mohs scale of mineral hardness. Using the rock cycle chart or one like it, discuss how hardness determines which materials can be used in homes, in landscapes, or for recreation.
Mineral Lab
LocationIndoor
Energy 3
Supply List5
Prep Time4

Cub Scout study and share observation of the mineral test.

For each Cub Scout:

  • Penny
  • Small piece of glass
  • Piece of unglazed tile
  • Metal file
  • Eyedropper
  • Safety glasses

Variety of minerals to test (pick at least two)

  • Talc
  • Gypsum
  • Calcite
  • Fluorite
  • Apatite
  • Feldspar
  • Quartz
  • Topaz
  • Corundum

Additional items:

  • Small bottle of vinegar, enough to share
  • Webelos handbook
  • Paper

Before the meeting:

  1. Buy or find at least two minerals to be tested.
  2. Prepare a mineral testing kit for yourself and test it out.
  3. Set up meeting space for Cub Scouts to have room to work.

During the meeting:

  1. Tell Cub Scouts that they will be testing for minerals. The Earth contains many useful minerals. Some, like silica (sand), are easy to see and collect. Others, like iron and zinc, are found in rocks. There are three categories of useful minerals: metals, nonmetallic minerals, and fuels.
  2. Ask them to open their Webelos handbook to page 217. They will be using the Mohs Hardness Scale to examine the minerals.
  3. Demonstrate how to test for a mineral:
    • Scratch the tile with your mineral to determine the “streak” of the mineral. The streak is the color of the resulting powder. It’s usually a more consistent color than the apparent color of the mineral. You can refer to a mineral identification chart to find out what minerals have this streak.
    • Use the eyedropper to put a drop of vinegar on the mineral. If the vinegar fizzes, that means the mineral contains calcium carbonate.
    • Test the hardness of the mineral by trying to scratch it, in order, with your fingernail, the penny, and the file or knife. Then, try to scratch the file or knife and the glass with the mineral. Refer to the chart to determine the mineral’s hardness. For example, if you can scratch the mineral with your fingernail, it measures 1 or 2 on the scale. If the mineral can scratch the file, it measures at least 7 on the scale.
  4. Pass out the minerals and have Cub Scouts test.
  5. Ask them what minerals they have found. Where could their mineral be used?
Grow a crystal.
Crystal Shapes
LocationIndoor
Energy 3
Supply List4
Prep Time4

Cub Scouts create their own crystal.

  • Pipe cleaners, one for each Cub Scout
  • Plastic or glass cup, one for each Cub Scout
  • 6” of fishing line for each Cub Scout
  • Wooden skewer, one for each Cub Scout
  • 1 ¾ cup Borax
  • 4 cups boiling water
  • Table covering
  • Disposable gloves for each Cub Scout

Before the meeting:

  1. A week before the meeting grow a borax crystal using the directions below. This will allow you to share the finished crystal.
  2. Set up meeting space with room for Cub Scouts to do their project. Cover the table.

During the meeting:

  1. Share with Cub Scouts that they will be making their own crystal. Show them the finished product and then lead them through the experiment.
    • Take the pipe cleaner and make a shape.
    • Tie the fishing line to the pipe cleaner, and then tie the other end of the line to a skewer. The pipe cleaner nest should hang down about an inch.
    • Have an adult stir the borax in the boiling water until it completely dissolves.
    • Pour ¾ cup of the mixture into each cup.
    • Place the hanging pipe cleaner into the cup and lay the skewer across the top of the cup so they hang freely.
    • Leave your pipe cleaners in the borax solution overnight or more.
  2. After one or more days, remove your pipe cleaner from the water and dry on a layer of paper towels. You should have a crystal.
Sweet Crystal
LocationIndoor
Energy 3
Supply List4
Prep Time4

Cub Scouts create their own crystal that they can eat.

  • 2 cups of water
  • 6 cups of granulated sugar
  • 2 or 3 drops of food coloring (optional)
  • ½ to a teaspoon of flavoring extract, optional
  • Medium size pan
  • Place to heat water
  • Paper towels, enough to share
  • Table covering

For each Cub Scout

  • Wooden skewer or string
  • Glass jar
  • Clothes pins

Before the meeting:

  1. Practice growing a crystal using the directions below. This will allow you to share the finished crystal.
  2. Clean the glass jars thoroughly with hot water.
  3. Prepare sugar water mixture.
    • Place the 2 cups of water in a medium-sized pan and bring it to a boil. Begin adding the sugar, 1 cup at a time, stirring after each addition. You’ll notice that it takes longer for the sugar to dissolve after each cup you add. Continue to stir and boil the syrup until all of the sugar has been added and it’s completely dissolved. Remove the pan from the heat.
    • If you’re using colors or flavorings, add 2 to 3 drops of food coloring and stir it in to ensure an even, smooth color. When using an extract, add 1 teaspoon of the extract; for flavoring oils, only add ½ 14 teaspoon. Make sure you don’t stand right in front of the pan because the scent can be very strong as it rises in the steam.
    • Allow the sugar syrup to cool for 20 to 30 minutes.
  4. Set up meeting space with room for Cub Scouts to do their project. Cover the table.

During the meeting:

  1. Share with Cub Scouts that they will be making a crystal that they can eat. Show them the finished product and then lead them through the experiment.
    • Wet each wooden skewer or string with water and roll it in granulated sugar. This base layer gives the sugar crystals something to grab when they start forming. Set these aside to dry while you prepare the sugar syrup.
    • Pour the syrup into the clean, prepared jars.
    • Lower one sugared skewer or string into each jar until it hangs about 1 inch from the bottom.
    • Carefully place your jar in a cool place, away from harsh lights, where it can sit undisturbed. Cover the top loosely with plastic wrap or a paper towel.
  2. Let Cub Scouts know that they should start to see sugar crystals forming within two to four hours. If you see no change after 24 hours, try boiling the sugar syrup again and dissolve another cup of sugar into it. Then pour it back into the jar and insert the skewer or string again. They may do this with adult supervision.
  3. Allow the rock candy to grow until it is the size you want. Don’t let it grow too large; otherwise, it might start growing onto the sides of your jar.
  4. Note that a top layer of crystal will form. This is OK. Once the candy has reached the desired size, break that top layer of crystal up with a fork before removing the candy.
  5. Transfer the rock candy to an empty jar or glass (keep the clothespins to balance it) and allow it to dry for one to two hours.
  6. Enjoy your rock candy.
Print

Safety Moment

Prior to any activity, use the BSA SAFE Checklist to ensure the safety of all those involved.

All participants in official BSA Scouting activities should become familiar with the Guide to Safe Scouting and applicable program literature or manuals.

Be aware of state or local government regulations that supersede BSA practices, policies, and guidelines.

To assist in the safe delivery of the program you may find specific safety items that are related to requirements for the Adventure.

Before starting any experiments in this Adventure:

  • Review the instructions completely for the experiment.
  • Conduct the experiment before the meeting to test the experiment.
  • Confirm additional adult supervision as needed.

During the Adventure:

  • Review the instructions fully with the den before beginning.
  • Wear protective clothing and eye protection.
  • Keep food and drinks away from experiment.