Into The Woods

Elective Adventure

Trees and plants play important roles in nature. In this Adventure, you will get to learn about the plants and trees in your community by exploring your area on a walk or visit to a local nature center, tree farm, or park. 

If you have ever stood beneath a towering redwood, enjoyed the colors of fall leaves, or watched pine trees swaying in the wind, you know that trees and plants are beautiful. But they are also important to life on Earth. As you go into the woods, you will learn what trees and plants do for us and for animals, and why taking care of them is important to our planet’s well-being. 

Requirements

Visit an area with trees and plants and conduct a tree inventory. Select one tree and complete the remaining requirements based on that tree.
Tree Inventory
LocationTravel
Energy 4
Supply List2
Prep Time5

Cub Scouts visit a park to conduct a tree inventory and select a tree to study.

  • Activity Consent Form
  • Tree Inventory found in Additional Resources, one per Cub Scout
  • Printer
  • Sharpened pencils, one per Cub Scout
  • Clipboard, one per Cub Scout
  • Plastic baggie

Before the meeting:

  1. Identify a park with plants and trees in which the Cub Scouts can conduct a tree inventory.
  2. Contact parents or legal guardians to give them the details of the visit. Remind them to bring the completed Activity Consent Form for their Cub Scout.
  3. A week prior and the day before, remind Cub Scouts, parents, and legal guardians of the date, time, and designated meeting location, especially if it is different than your normal den meeting.
  4. Print the Tree Inventory, one per Cub Scout.

During the meeting:

  1. Gather Cub Scouts at the designated meeting location.
  2. Hand out the Tree Inventory, a pencil, and a clipboard to each Cub Scout.
  3. Define the area in which the Cub Scouts will conduct their tree inventory.
  4. Have Cub Scouts complete their Tree Inventory by observing the trees in the defined inventory area.
  5. Ask Cub Scouts to select one tree they would like to learn more about. Give them time to make observations in that section of the Tree Inventory.
    • Observe the higher branches of the tree for broken limbs, nests, and holes.
    • Observe the lower branches of the tree for nibbled-on bark, twigs, and leaves.
    • Observe the leaves. What is their shape? Are they large? Small? Needles?
    • Observe if the tree has any seeds, fruit, or flowers. What colors? What do they smell like?
    • Observe the texture of the bark. Is it smooth? Rough? Light? Dark?
    • Observe the bark for scratches or marks from antlers or claws.
    • Observe the bark for holes created by woodpeckers or insects.
    • Observe the surrounding ground for fruit, nuts, seeds, leaves, needles, twigs, or bark that may have fallen.
    • Observe the surrounding ground for animal scat or tracks.
    • Observe any sounds of wildlife around the tree. Squirrels scurrying? Birdsong? Woodpeckers drumming? Buzzing insects?
  6. Have Cub Scouts collect either a leaf or a cluster of needles, preferably ones that are already on the ground. Place in plastic baggie. These will be used in requirement 2.

Tip: Help Cub Scouts take a photo of their tree to aid with identification and observations if the remaining requirements for the adventure will be completed at another time or location.

Tree Inventory

Determine if your tree is deciduous or evergreen.
Leaf Rubbing
LocationIndoor
Energy 2
Supply List2
Prep Time2

Cub Scouts make a rubbing of the leaf or needles from their chosen tree.

Before the meeting:

  1. Remind Cub Scouts to bring the leaf or needles they collected in requirement 1 and their tree inventory.
  2. Gather supplies.
  3. Set up meeting space with a flat space to do the rubbing.

During the meeting:

  1. Gather Cub Scouts and explain the difference between deciduous or evergreen trees.
    • Coniferous trees have seeds that grow in cones, which is where the word “coniferous” comes from. When a cone’s scales open, the seeds fall out, and new trees can take root grow in cones, which is where the word “coniferous” comes from. When a cone’s scales open, the seeds fall out, and new trees can take root. Most coniferous trees are evergreen, meaning they don’t lose their needles in the fall.
    • Deciduous trees have wide, flat leaves that are good at capturing sunlight. They are called deciduous because most of them lose their leaves each year. Deciduous trees do not produce cones. Instead, their seeds are contained in nutshells or fruit. Oaks, maples, poplars, beeches, sycamores, and ashes are examples of deciduous trees.
  2. Have Cub Scouts place their leaf or needles on a flat, smooth surface, preferably vein-side up. Cover the leaf or needles with a blank piece of paper.
  3. Firmly hold the paper in place and rub the pencil back and forth across the paper covering the leaf or needles. The margin of the leaf and its veins or the needles should show on the paper as the Cub Scouts rub gently with the pencil. Make sure they rub over the entire leaf or needle cluster.
  4. Give Cub Scouts time to make detailed observations. Have them check for:
    • Color. Is the leaf green? Has it started to change color due to the seasons?
    • Texture of the leaf. Is it smooth? Is it rough?
    • Edges of the leaf. Are they smooth or toothed?
    • Can they see the stomata on the underside of the leaf? (Stomata are tiny pores that open during the day to take in carbon dioxide and close at night to avoid losing too much water.)
    • Can they find the midrib and petiole? (The midrib runs along the center of the leaf and contains the central vein. It provides support to the leaf and ends in the petiole, the stiff stalk connecting the leaf to the plant stem.)
    • Unusual features on the blade (the flat part of the leaf made of green tissue which absorbs sunlight, making the sugar needed for the plant to grow). Are there holes from insects? Discoloration? Other damage?
  5. Using the rubbings and the tree identification resources available, have the Cub Scouts work together in small groups to determine if their tree is deciduous or coniferous.
Leaf Snapshot
LocationIndoor
Energy 1
Supply List2
Prep Time2

Cub Scouts photograph their leaf and enlarge the image to determine if it is deciduous or coniferous.

Before the meeting:

  1. Remind Cub Scouts to bring the leaf or needles they collected in requirement 1 and their tree inventory.
  2. Gather supplies.
  3. Set up meeting space with a flat space for setting up leaves and needles for picture taking.

During the meeting:

  1. Coniferous trees have seeds that grow in cones, which is where the word “coniferous” comes from. When a cone’s scales open, the seeds fall out, and new trees can take root grow in cones, which is where the word “coniferous” comes from. When a cone’s scales open, the seeds fall out, and new trees can take root. Most coniferous trees are evergreen, meaning they don’t lose their needles in the fall.
  2. Deciduous trees have wide, flat leaves that are good at capturing sunlight. They are called deciduous because most of them lose their leaves each year. Deciduous trees do not produce cones. Instead, their seeds are contained in nutshells or fruit. Oaks, maples, poplars, beeches, sycamores, and ashes are examples of deciduous trees.
  3. Using a smart device, ask Cub Scouts to take a photo of their leaf or needles. Make sure the photo is in focus so it can be enlarged.
  4. Have Cub Scouts zoom in on different parts of their leaf to see details.
  5. Give Cub Scouts time to make detailed observations. Have them check for:
    • Color. Is the leaf green? Has it started to change color due to the seasons?
    • Texture of the leaf. Is it smooth? Is it rough?
    • Edges of the leaf. Are they smooth or toothed?
    • Can they see the stomata on the underside of the leaf? (Stomata are tiny pores that open during the day to take in carbon dioxide and close at night to avoid losing too much water.)
    • Can they find the midrib and petiole? (The midrib runs along the center of the leaf and contains the central vein. It provides support to the leaf and ends in the petiole, the stiff stalk connecting the leaf to the plant stem.)
    • Unusual features on the blade (the flat part of the leaf made of green tissue which absorbs sunlight, making the sugar needed for the plant to grow). Are there holes from insects? Discoloration? Other damage?
  6. Discuss with the Cub Scouts their observations. Using the tree identification resources available, have the Cub Scouts work together in small groups to determine if their tree is deciduous or coniferous.
Under the Microscope
LocationIndoor
Energy 1
Supply List5
Prep Time2

Cub Scouts use a pocket microscope to examine their leaf.

Before the meeting:

  1. Remind Cub Scouts to bring the leaf or needles they collected in requirement 1 and their tree inventory.
  2. Gather supplies.
  3. Set up meeting space with a flat space for microscopes.

During the meeting:

  1. Gather Cub Scouts and explain the difference between deciduous or evergreen trees.
    1. Coniferous trees have seeds that grow in cones, which is where the word “coniferous” comes from. When a cone’s scales open, the seeds fall out, and new trees can take root grow in cones, which is where the word “coniferous” comes from. When a cone’s scales open, the seeds fall out, and new trees can take root. Most coniferous trees are evergreen, meaning they don’t lose their needles in the fall.
    2. Deciduous trees have wide, flat leaves that are good at capturing sunlight. They are called deciduous because most of them lose their leaves each year. Deciduous trees do not produce cones. Instead, their seeds are contained in nutshells or fruit. Oaks, maples, poplars, beeches, sycamores, and ashes are examples of deciduous trees.
  2. Have Cub Scouts place the microscope directly above their leaf or needles at a 90º angle. Have the Cub Scouts turn on the LED light switch and begin viewing through the eyepiece.
  3. Help Cub Scouts adjust the coarse knob or focus ring to fix the focus. Then, help them move the fine adjustment or zooming dial to focus up close and in higher magnification.
  4. Give Cub Scouts time to make detailed observations. Have them check for:
    • Color. Is the leaf green? Has it started to change color due to the seasons?
    • Texture of the leaf. Is it smooth? Is it rough?
    • Edges of the leaf. Are they smooth or toothed?
    • Can they see the stomata on the underside of the leaf? (Stomata are tiny pores that open during the day to take in carbon dioxide and close at night to avoid losing too much water.)
    • Can they find the midrib and petiole? (The midrib runs along the center of the leaf and contains the central vein. It provides support to the leaf and ends in the petiole, the stiff stalk connecting the leaf to the plant stem.)
    • Unusual features on the blade (the flat part of the leaf made of green tissue which absorbs sunlight, making the sugar needed for the plant to grow). Are there holes from insects? Discoloration? Other damage?
  5. Discuss with the Cub Scouts their observations. Using the tree identification resources available, have the Cub Scouts work together in small groups to determine if their tree is deciduous or coniferous.
Determine if your tree is native or was introduced to your area.
Native, Introduced, Or Invasive
LocationIndoor
Energy 1
Supply List2
Prep Time2

Cub Scouts determine whether their tree is native, introduced, or invasive.

Before the meeting:

  1. Remind Cub Scouts to bring the leaf or needles they collected in requirement 1 and their tree inventory.
  2. Gather supplies.
  3. Set up meeting space with a flat space for setting up leaves and needles.

During the meeting:

  1. Discuss the meaning of the terms native or introduced.
    • Native trees occur naturally. Native trees are perfect for providing food and shelter for wildlife, manufacturing oxygen for both animals and humans.
    • Introduced trees are species that are not native to the specific locations where they are found. These non-native plants have usually become established at new locations due to deliberate or accidental human activities.
    • Sometimes trees are considered invasive. Invasive species adversely affect habitats and bioregions, causing ecological, environmental, and/or economic damage.
  2. Ask Cub Scouts to think about native and introduced trees:
    • What are some examples of native trees in your area? What are the benefits these trees provide to your community?
    • What are some examples of introduced trees in your area? Why were these trees introduced? For decorative landscaping? For lumber harvest? For agriculture?
    • What are some examples of invasive trees in your area? How or why were these trees introduced? What impact are they having on the native trees? What impact are they having on wildlife?
  3. Have Cub Scouts determine if the tree they selected is native or introduced. If introduced, is the tree invasive?
Find out how your tree deals with wildfire.
Burning Questions
LocationOutdoor
Energy 3
Supply List4
Prep Time2

Cub Scouts will observe how different types of wood burn.

  • Tree cookie samples of at least four different types of wood, with the bark intact, all of a similar size
  • Matches or a lighter
  • Fire-resistant surface or non-burnable container for the fire, such as a metal or aluminum trash can lid placed on bricks or cinder blocks
  • Fire extinguisher or bucket of sand, mud, or water
  • Protective and fire-resistant clothing and gloves
  • Burning Questions found in Additional Resources, one for the group
  • Printer

Before the meeting:

  1. Using the Burning Questions resource, familiarize yourself with burning of tree bark. Think about how to do it safely and what the Cub Scouts should expect.
  2. Gather supplies and set up meeting space to safely burn bark.

During the meeting:

  1. Gather Cub Scouts in a clear, open area.
  2. Show Cub Scouts the tree cookies and identify the types of trees from which they come.
  3. Safely burn each of the tree cookie samples.
  4. When the demonstration is finished, discuss with Cub Scouts their observations.
    • Which type of wood burned the for longest amount of time? The shortest amount of time?
    • Which type of wood caught fire the quickest? The slowest?
    • How did the bark react to the fire?

After the meeting:

  1. Make sure the fire is completely out and the area is cleaned up.

Burning Questions resource

Forestry Visit
LocationIndoor
Energy 2
Supply List4
Prep Time4

Cub Scouts talk with a Fire Management Officer to learn about wildfires and prescribed burns.

  • Guest from the Department of Natural Resources or local Forest Service

Before the meeting:

  1. Contact the Department of Natural Resources or local Forest Service to schedule a visit. Let them know that you have a group of 5th graders learning about wildfires and forest management. Explain that you would like the speaker to discuss naturally occurring wildfires, as well as prescribed burns. Ask them to bring any supplies they will need.
  2. Send a reminder to the guest the day before.
  3. Set up meeting space for speaker and Cub Scouts.

During the meeting:.

  1. Encourage Cub Scouts to ask questions. Remind them to be respectful during the presentation.
  2. Ask the guest presenter to discuss the following:
    • Trees in fire-prone areas develop thicker bark for protection.
    • How topography, environment, and weather factor in a fire.
    • What is a prescribed burn? What is a burn ban?
    • How a low-intensify fire can be helpful to a forest.
    • The impact a high-severity fire can have on an ecosystem.
    • What is a mosaic fire?
  3. When they’re finished, have Cub Scouts ask questions such as:
    • How did you learn about wildfire safety?
    • Have you ever helped control a wildfire?
    • Was it scary?
    • How would the tree they are learning about deal with fire?

After the meeting:

Send a thank you note to the speaker.

Fire Basics for Kids

How Does Wildfire Impact Wildlife and Forests

Wildland Fire Junior Ranger Activity Book

Learn how wildlife uses your tree.
Trees As Habitats
LocationIndoor
Energy 1
Supply List2
Prep Time2

Cub Scouts investigate the relationships between trees and wildlife.

  • Tree inventory from requirement 1

Before the meeting:

  1. Remind Cub Scouts to bring their tree inventory completed requirement 1.

During the meeting:

  1. Discuss with Cub Scouts some ways in which animals depend on and utilize trees.
    • How is the tree used for shelter? Is there a nest in its branches? Is there a hole or a hollow in which an owl, raccoon, or other animal could live? Can tree frogs, beetles, or bats live under the tree’s bark?
    • How is the tree used for food? Does the tree grow fruit, seeds, or flowers that can be eaten by wildlife? Can woodpeckers and other wildlife eat the insects that live in the trees?
    • How is the tree used for protection? Can squirrels and deer mice store food in cavities?
    • How is the tree used as a playground? Do you see animals climbing around or in the tree? Do you see birds flying to and from it?
  2. Have Cub Scouts brainstorm ways in which animals might use the tree they selected. They should review their recorded observations from their tree inventory. Ask Cub Scouts to share what clues they observed that indicate how wildlife uses their tree.
  3. Ask Cub Scouts how humans use their tree. Are the uses similar? Different?
Print

Safety Moment

Prior to any activity, use the BSA SAFE Checklist to ensure the safety of all those involved.

All participants in official BSA Scouting activities should become familiar with the Guide to Safe Scouting and applicable program literature or manuals.

Be aware of state or local government regulations that supersede BSA practices, policies, and guidelines.

To assist in the safe delivery of the program you may find specific safety items that are related to requirements for the Adventure.

Before starting this Adventure, review Digital Safety and Online Scouting Activities.