Math On The Trail

Elective Adventure

In this Adventure, you will learn how to estimate the time it takes you to take a walk. If you know your pace, you can estimate how long it will take you and others to walk any given distance.

Requirements

Determine your walking pace by walking ¼ mile. Make a projection on how long it would take you to walk 2 miles.
Timing A Quarter Mile Indoor
LocationIndoor
Energy 4
Supply List2
Prep Time2

Cub Scouts project how long it will take to walk 2 miles in an indoor setting

  • 8 ½” x 11” paper cut into two equal strips, 2 strips per Cub Scout
  • Timer, one for every two Cub Scouts
  • Orange safety cone
  • Projections Recording Sheet found in Additional Resources
  • 8 ½” x 11” paper, one for each Cub Scout
  • Pencils, one for each Cub Scout
  • Printer

Before the meeting:

  1. Determine how long ¼ a mile is in your meeting space by using a pedometer that converts steps to miles. Mark the ¼ mile route with the orange safety cone.
  2. Cut 8 ½” x 11” paper in half. Provide two half-papers for each Cub Scout.
  3. Print a Projections Recording Sheet for each Cub Scout.

During the meeting:

  1. Share with Cub Scouts that they will be learning how to calculate a long walk distance by using a short walking distance. By walking just ¼ of a mile, they will be able to figure out about how long it will take to walk 2 miles.
  2. First, they must determine how many ¼ are in 2 miles. Ask Cub Scouts, how many fourths are in 2 miles?
  3. Provide Cub Scouts with paper, pencil, and time to think about the problem. Allow them to discuss with each other. If Cub Scouts figure out 8 fourths in 2 miles, then move on to step 2. If the Cub Scouts are unsure or unclear about how to find ¼ of 2 miles, follow the steps below.
    • Hand two strips of paper to each Cub Scout.
    • Tell Cub Scouts that one paper strip represents one mile. Model writing 1 mile on one side of the strip. Cub Scouts write 1 mile on each strip.
    • Ask, how could we fold this so it would make four equal parts or fourths? Collect ideas. Be sure to ensure that the way they fold creates EQUAL parts for each fourth.
    • Allow Cub Scouts to fold paper into fourths.
    • Label each of the four parts with one fourth – Ask: How many fourths are in 1 mile?
    • After they say, 4 fourths or 4/4, then ask them to guess how many fourths would be in 2 miles? Take guesses. If they say 8/4, then have them create the 2nd strip the same way they made the first strip. If the cubs have a hard time coming up with the 8/4, create the 2nd strip together.
    • In the end, you should have two strips representing each of the two-mile cut into fourths with a total of 8/4 (eight-fourths).
  4. Determine the pace for walking ¼ a mile using a timer.
    • Explain that pace is how long it takes a person to cover a distance. Scouts sometimes count their steps over a given distance, or they use the time it takes the person to cover a determined (set) distance. During this activity, Cub Scouts will use time to calculate how long it takes each person to cover a set distance.
    • Show Cub Scouts previously set up a route of ¼ mile.
    • Show Cub Scouts how to use the timer.
    • Ask adults to be the timekeeper.
    • Show how to record your time on the Projections Recording Sheet.
  5. Walk the ¼ mile. If needed, model the starting of the timer, the walk, and the writing down of the time. Allow Cub Scouts to walk their distance.
  6. Create the projection by asking Cub Scouts how could you determine how long it will take you to walk the two miles? Allow Cub Scouts to problem solve by giving them time to think and use paper and pencils to solve the problem. Cubs Scouts might add their time 8 times. Some Cub Scouts might multiply their time times eight. Encourage their thinking and way of problem-solving. Allow cubs to come to their answers. If cubs are having trouble, use the steps below to help them through their thinking.
    • Using the strips Cub Scouts created in step 1, have each child record the time in one of the ¼ boxes. Tell them this is how long it took you to walk part of the two miles. Show the Cub Scout both strips, how long could it take you to walk two miles?
    • Cub Scouts might write each time in the boxes and then choose to add or multiply to get their answer.
  7. Save this projected time to use in the following requirements.

Projections Recording Sheet

Phone app Pedometers

Timing a Quarter Mile On the Trail
LocationTravel
Energy 4
Supply List2
Prep Time5

Cub Scouts project how long it will take to walk 2 miles on a trail.

  • Activity Consent form
  • Cub Scout Six Essentials
  • Map of trail, either paper or digital
  • 8 ½” x 11” paper cut into two equal strips, 2 strips per Cub Scout
  • Timer, one for every two Cub Scouts
  • Orange safety cone
  • Projections Recording Sheet found in Additional Resources
  • 8 ½” x 11” paper, one for each Cub Scout
  • Pencils, one for each Cub Scout
  • Clipboard for each Cub Scout
  • Printer

Before the meeting:

  1. Find a location to walk along a trail. If combining the entire Math on the Trail Requirement together in one meeting, find a hiking trail that is about 2 miles long.
  2. Determine how long ¼ a mile is on the trail. Mark the route on the map or hiking app. Assign an adult or den chief to monitor the map or hiking app to notify when the group reaches ¼ mile.
  3. Contact parents and legal guardians to let them know Cub Scouts must wear comfortable clothes, close toe shoes, and bring their Cub Scout Six Essentials. Remind them of the meeting location date and time and to bring a completed Activity Consent Form.
  4. Cut 8 ½” x 11” paper in half. Provide two half-papers for each Cub Scout.
  5. Print a Projections Recording Sheet for each Cub Scout.

During the meeting:

  1. Share with Cub Scouts that they will be learning how to calculate a long walk distance by using a short walking distance. By walking just ¼ of a mile, they will be able to figure out about how long it will take to walk 2 miles.
  2. First, they must determine how many ¼ are in 2 miles. Ask Cub Scouts, how many fourths are in 2 miles?
  3. Provide Cub Scouts with paper, pencil, and time to think about the problem. Allow them to discuss with each other. If Cub Scouts figure out 8 fourths in 2 miles, then move on to step 2. If the Cub Scouts are unsure or unclear about how to find ¼ of 2 miles, follow the steps below.
    • Hand two strips of paper to each Cub Scout.
    • Tell Cub Scouts that one paper strip represents one mile. Model writing 1 mile on one side of the strip. Cub Scouts write 1 mile on each strip.
    • Ask, how could we fold this so it would make four equal parts or fourths? Collect ideas. Be sure to ensure that the way they fold creates EQUAL parts for each fourth.
    • Allow Cub Scouts to fold paper into fourths.
    • Label each of the four parts with one fourth – Ask: How many fourths are in 1 mile?
    • After they say, 4 fourths or 4/4, then ask them to guess how many fourths would be in 2 miles? Take guesses. If they say 8/4, then have them create the 2nd strip the same way they made the first strip. If the cubs have a hard time coming up with the 8/4, create the 2nd strip together.
    • In the end, you should have two strips representing each of the two-mile cut into fourths with a total of 8/4 (eight-fourths).
  4. Determine the pace for walking ¼ a mile using a timer.
    1. Explain that pace is how long it takes a person to cover a distance. Scouts sometimes count their steps over a given distance, or they use the time it takes the person to cover a determined (set) distance. During this activity, Cub Scouts will use time to calculate how long it takes each person to cover a set distance.
    2. Show Cub Scouts previously set up a route of ¼ mile.
    3. Show Cub Scouts how to use the timer.
    4. Ask adults to be the timekeeper.
    5. Show how to record your time on the Projections Recording Sheet.
  5. Walk the ¼ mile. If needed, model the starting of the timer, the walk, and the writing down of the time. Allow Cub Scouts to walk their distance.
  6. Create the projection by asking Cub Scouts how could you determine how long it will take you to walk the two miles? Allow Cub Scouts to problem solve by giving them time to think and use paper and pencils to solve the problem. Cubs Scouts might add their time 8 times. Some Cub Scouts might multiply their time times eight. Encourage their thinking and way of problem-solving. Allow cubs to come to their answers. If cubs are having trouble, use the steps below to help them through their thinking.
    • Using the strips Cub Scouts created in step 1, have each child record the time in one of the ¼ boxes. Tell them this is how long it took you to walk part of the two miles. Show the Cub Scout both strips, how long could it take you to walk two miles?
    • Cub Scouts might write each time in the boxes and then choose to add or multiply to get their answer.
  7. Save this projected time to use in the following requirements.

Projections Recording Sheet

Phone app Pedometers

Timing A Quarter Mile Outdoor Track
LocationTravel
Energy 4
Supply List2
Prep Time4

Cub Scouts project how long it will take to walk 2 miles on a track.

  • Activity Consent form
  • 8 ½” x 11” paper cut into two equal strips, 2 strips per Cub Scout
  • Timer, one for every two Cub Scouts
  • Orange safety cone
  • Projections Recording Sheet found in Additional Resources
  • 8 ½” x 11” paper, one for each Cub Scout
  • Pencils, one for each Cub Scout
  • Clipboard for each Cub Scout
  • Printer

Before the meeting:

  1. Find a location with a track.
  2. Determine how long ¼ a mile for the track. Tracks do vary based on size. Most standard tracks are 400 meters. One mile is equal to 1,609 meters. About one lap would be ¼ mile. Mark the ¼ mile route with the orange safety cone.
  3. Contact parents and legal guardians to let them know Cub Scouts must wear comfortable clothes, close toe shoes, and bring their Cub Scout Six Essentials. Remind them of the meeting location date and time and to bring a completed Activity Consent Form.
  4. Cut 8 ½” x 11” paper in half. Provide two half-papers for each Cub Scout.
  5. Print a Projections Recording Sheet for each Cub Scout.

During the meeting:

  1. Share with Cub Scouts that they will be learning how to calculate a long walk distance by using a short walking distance. By walking just ¼ of a mile, they will be able to figure out about how long it will take to walk 2 miles.
  2. First, they must determine how many ¼ are in 2 miles. Ask Cub Scouts, how many fourths are in 2 miles?
  3. Provide Cub Scouts with paper, pencil, and time to think about the problem. Allow them to discuss with each other. If Cub Scouts figure out 8 fourths in 2 miles, then move on to step 2. If the Cub Scouts are unsure or unclear about how to find ¼ of 2 miles, follow the steps below.
    • Hand two strips of paper to each Cub Scout.
    • Tell Cub Scouts that one paper strip represents one mile. Model writing 1 mile on one side of the strip. Cub Scouts write 1 mile on each strip.
    • Ask, how could we fold this so it would make four equal parts or fourths? Collect ideas. Be sure to ensure that the way they fold creates EQUAL parts for each fourth.
    • Allow Cub Scouts to fold paper into fourths.
    • Label each of the four parts with one fourth – Ask: How many fourths are in 1 mile?
    • After they say, 4 fourths or 4/4, then ask them to guess how many fourths would be in 2 miles? Take guesses. If they say 8/4, then have them create the 2nd strip the same way they made the first strip. If the cubs have a hard time coming up with the 8/4, create the 2nd strip together.
    • In the end, you should have two strips representing each of the two-mile cut into fourths with a total of 8/4 (eight-fourths).
  4. Determine the pace for walking ¼ a mile using a timer.
    • Explain that pace is how long it takes a person to cover a distance. Scouts sometimes count their steps over a given distance, or they use the time it takes the person to cover a determined (set) distance. During this activity, Cub Scouts will use time to calculate how long it takes each person to cover a set distance.
    • Show Cub Scouts previously set up a route of ¼ mile.
    • Show Cub Scouts how to use the timer.
    • Ask adults to be the timekeeper.
    • Show how to record your time on the Projections Recording Sheet.
  5. Walk the ¼ mile. If needed, model the starting of the timer, the walk, and the writing down of the time. Allow Cub Scouts to walk their distance.
  6. Create the projection by asking Cub Scouts how could you determine how long it will take you to walk the two miles? Allow Cub Scouts to problem solve by giving them time to think and use paper and pencils to solve the problem. Cubs Scouts might add their time 8 times. Some Cub Scouts might multiply their time times eight. Encourage their thinking and way of problem-solving. Allow cubs to come to their answers. If cubs are having trouble, use the steps below to help them through their thinking.
    • Using the strips Cub Scouts created in step 1, have each child record the time in one of the ¼ boxes. Tell them this is how long it took you to walk part of the two miles. Show the Cub Scout both strips, how long could it take you to walk two miles?
    • Cub Scouts might write each time in the boxes and then choose to add or multiply to get their answer.
  7. Save this projected time to use in the following requirements.

Projections Recording Sheet

Phone app Pedometers

Walk 2 miles and record the time it took you to complete the two miles.
Timing 2 Miles Indoor
LocationIndoor
Energy 4
Supply List2
Prep Time2

Cub Scouts validate how long it will take to walk 2 miles in an indoor setting.

  • Timer, one for every two Cub Scouts
  • Orange safety cone
  • Projections Recording Sheet from requirement 1
  • 8 ½” x 11” paper, one for each Cub Scout
  • Pencils, one for each Cub Scout
  • Rubber bands, number of rubber bands per lap * number of Cub Scouts

Before the meeting:

  1. Determine how long 2 miles is in your meeting space. Mark the 2-mile route with an orange safety cone. Note: Requirement 1 of Math on the Trail Adventure had you set up ¼ mile track. Using this same track is encouraged. Calculate how many laps are needed to complete 2 miles on the indoor track.
  2. Calculate the number of rubber bands needed to complete the 2 miles.

During the meeting:

  1. Review the Projected Time the Cub Scouts completed in requirement 1. Explain that today Cub Scouts are going to see how close our estimate was to the actual time.
  2. Show Cub Scouts what 2 miles looks like on the indoor created track.
  3. Walkers will keep track of their laps. Explain to Cub Scouts that each time they complete a lap, an adult or the den chief will place a rubber band on their wrist. When they have “x” number of rubber bands, they will have completed 2 miles.
  4. Assign an adult or a den chief person to be the timekeeper.
  5. Walk the 2 miles. Remind Cub Scouts, that this is not a race, they are walking to get a pace to see if our prediction from requirement 1. is correct. Adding any Cub Scout Pizzazz is encouraged: walking music, theme, celebration during each lap, singing songs during walking (Songbook), etc.
  6. Record the time it took Cub Scouts to walk 2 miles. Save this information, the Cub Scout will need it for requirement 3

Projections Recording Sheet

Phone app Pedometers

Timing 2 Miles On The Trail
LocationTravel
Energy 4
Supply List2
Prep Time5

Cub Scouts validate how long it will take to walk 2 miles on a trail.

  • Activity Consent form
  • Cub Scout Six Essentials
  • Map of trail, either paper or digital
  • 8 ½” x 11” paper cut into two equal strips, 2 strips per Cub Scout
  • Timer, one for every two Cub Scouts
  • Projections Recording Sheet found in Additional Resources

Before the meeting:

  1. Find a trail. If combining the entire Math on the Trail Requirements together in one meeting, find a trail that is about 2 miles long.
  2. Determine the path of a 2-mile path for the on the trail. Remember you can always find a one-mile trail in and a one-mile hike back. Mark the route on the map or hiking app. Assign an adult or den chief to monitor the map or hiking app to notify when the group reaches 2 miles.
  3. Contact parents and legal guardians to let them know Cub Scouts must wear comfortable clothes, close toe shoes, and bring their Cub Scout Six Essentials. Remind them of the meeting location date and time and to bring a completed Activity Consent Form.

During the meeting:

  1. Review the Projected Time the Cub Scouts completed in requirement 1. Explain that today Cub Scouts are going to see how close our estimate was to the actual time.
  2. Show Cub Scouts what 2 miles looks like on the map of the trail.
  3. Walk the 2 miles. Remind Cub Scouts, that this is not a race, they are walking to get a pace to see if our prediction from requirement 1. is correct.
  4. Record the time it took Cub Scouts to walk 2 miles. Save this information, the Cub Scout will need it for requirement 3.

Projections Recording Sheet

Phone app Pedometers

Timing 2 Miles Outdoor Track
LocationTravel
Energy 4
Supply List2
Prep Time4

Cub Scouts validate how long it will take to walk 2 miles on an outdoor track.

  • Activity Consent form
  • Timer, one for every two Cub Scouts
  • Orange safety cone
  • Projections Recording Sheet from requirement 1
  • 8 ½” x 11” paper, one for each Cub Scout
  • Pencils, one for each Cub Scout
  • Rubber bands, number of rubber bands per lap * number of Cub Scouts

Before the meeting:

  1. Determine how long 2 miles for the track. Tracks do vary based on size. Most standard tracks are 400 meters. One mile is equal to 1,609 meters. About one lap would be ¼ mile. In this case, 8 laps would be 2 miles.
  2. Calculate the number of rubber bands needed to complete the 2 miles.
  3. Contact parents and legal guardians to let them know Cub Scouts must wear comfortable clothes, close toe shoes, and bring their Cub Scout Six Essentials. Remind them of the meeting location date and time and to bring a completed Activity Consent Form.

During the meeting:

  1. Review the Projected Time the Cub Scouts completed in requirement 1. Explain that today Cub Scouts are going to see how close our estimate was to the actual time.
  2. Show Cub Scouts what 2 miles looks like on the indoor created track.
  3. Walkers will keep track of their laps. Explain to Cub Scouts that each time they complete a lap, an adult or the den chief will place a rubber band on their wrist. When they have “x” number of rubber bands, they will have completed 2 miles.
  4. Assign an adult or a den chief person to be the timekeeper.
  5. Walk the 2 miles. Remind Cub Scouts, that this is not a race, they are walking to get a pace to see if our prediction from requirement 1. is correct. Adding any Cub Scout Pizzazz is encouraged: walking music, theme, celebration during each lap, singing songs during walking (Songbook), etc.
  6. Record the time it took Cub Scouts to walk 2 miles. Save this information, the Cub Scout will need it for requirement 3.

Projections Recording Sheet

Phone app Pedometers

Make a projection on how long it would take you to hike a 20-mile trail over two days. List all the factors to consider for your projection.
If I Could Walk 20 Miles
LocationIndoor
Energy 1
Supply List2
Prep Time1

Using the times recorded in requirements 1 and 2, determine how long it will take to walk 20 miles.

  • Recorded Times from requirements 1 and 2
  • Pencils, one for each Cub Scout
  • Paper for math calculations, one for each Cub Scout

Before the meeting:

  1. Complete Math on the Trail requirements 1 and 2.
  2. Set up meeting space with a place for Cub Scouts to do their calculations and write.

During the meeting:

  1. Pose the question: using the data (times recorded in requirements 1 and 2), determine how long it will take to walk 20 miles.
  2. Allow Cub Scouts time to problem solve. Some Cub Scouts will understand that 20 miles is 10 groups of 2 miles. To find the time for 20 miles the Cub Scout will multiply the 2-mile time by 10 and get the correct answer. Some Cub Scouts might make a table to figure out their time. Allow many different ways to solve the problem.
  3. Cub Scouts should share their projections for walking 20 miles. Remind them that the number they come up with is in minutes. Cub Scouts could convert their time to hours. Remind them that there are 60 minutes in one hour.
  4. Explain a long trek like 20 miles, typically hikers split that between two days. Cub Scouts should determine how many hours they should walk in the two days to make it 20 miles.
  5. Discuss the conditions of your walking path (indoor, track, or hiking trail). Cub Scouts should describe how easy it was to walk in those conditions. Discuss different conditions or factors that might slow down the walking time (weather, rocky hiking conditions, flat ground, etc.) List all the factors to consider.
  6. Ask Cub Scouts how these factors might affect the projection. Possible examples: Snow might slow down your pace. The rocky path would need you to slow down to ensure your footing. Crossing a stream would slow down your pace to find a safe crossing. Factors would slow down your pace, so hikers need to consider these when determining the time of a long hike.
Print

Safety Moment

Prior to any activity, use the BSA SAFE Checklist to ensure the safety of all those involved.

All participants in official BSA Scouting activities should become familiar with the Guide to Safe Scouting and applicable program literature or manuals.

Be aware of state or local government regulations that supersede BSA practices, policies, and guidelines.

To assist in the safe delivery of the program you may find specific safety items that are related to requirements for the Adventure.