Den or pack provides a build day for Cub Scouts.
Ask parents in the den or pack if anyone has a workshop with woodworking tools. Determine how many Cub Scouts and parents could fit in the space and develop a time schedule, if needed, to keep the workshop from being overcrowded.
OR
Ask parents in the pack if anyone has some of the tools below and would be willing to bring them to a location to conduct a build day. This would allow several cars to be worked on at once.
OR
Check with your local Scout Shop. Some Scout Shops will conduct Pinewood Derby build days.
Only adults may use power tools in Cub Scouting. Adults who are using power tools must wear appropriate safety gear including eye protection and ear protection.
Cutting out the basic shape of a Pinewood Derby car is easily done with a band saw or a scroll saw.
A build day is longer than a typical meeting. Cutting out cars, painting them, allowing them to dry, and assembling them will take hours based on the number of power tools available and the number of Cub Scouts in the den or pack.
Before the meeting:
During the meeting:
Tip: Make sure the axles are square, at a 90-degree angle. This will keep the car straight when going down the track. If the axles are not square, the car may want to turn and rub up against the track causing it to slow down. Test the car by simply pushing it across the floor to see if it goes straight.
Den or pack provides a build day for Cub Scouts.
A build day is longer than a typical meeting. Painting the boats, allowing them to dry, and assembling them will take hours based on the dry time of the paint.
Before the meeting:
During the meeting:
Tip: Add wax to the bottom of the boat, the hull, to make it extra smooth. The smoother the hull, the faster the boat can go.
Memory Game using Pinewood Derby or Raingutter Regatta Rules
Before the meeting:
During the meeting:
Cub Scouts will act out through roll playing how to be a good sport during the race
Before the meeting:
During the meeting:
Conduct a Pinewood Derby car race.
This supply list is not all-inclusive. Your Cub Scout pack may include additional items such as food, drinks, special guests, special races, or a “pit stop” that has tools for Cub Scouts to make any last-minute repairs if their car breaks.
These directions are not all-inclusive. Some packs make their Pinewood Derby race a stand-alone event with food and entertainment. Additional directions may be constructed by your pack based on how your pack conducts the race.
Before the meeting :
During the meeting:
Conduct a Raingutter Regatta.
This supply list is not an all-inclusive list. Your Cub Scout Pack may include additional items such as food, drinks, special guests, special races, or may make this part of a larger pack event.
These directions are not all-inclusive. Some packs make their Raingutter Regatta a stand-alone event with food and entertainment. Additional directions should be constructed by your pack based on how your pack conducts the regatta.
Before the meeting :
During the meeting:
Cub Scouts play a game to learn Safe Swim Defense.
Before the meeting:
During the meeting:
Cub Scouts l learn order of rescue and reach and throw rescue techniques.
Public pools often have rescue equipment, check with the pool to see if your den is able to use the equipment.
Before the meeting:
During the meeting:
Cub Scouts attempt the BSA swimmer test.
Before the meeting:
During the meeting:
Tip: The outcome of this requirement is for Cub Scouts to attempt the BSA Swimmer Test. It is okay if they do not pass the test.
Take your patrol and go swimming.
Before the meeting:
During the meeting:
Participate in an activity with your pack.
Participate in an activity with your pack such as:
Participate in an activity with your patrol.
Participate in an activity with your patrol such as:
Den or pack provides a build day for Cub Scouts.
Ask parents in the den or pack if anyone has a workshop with woodworking tools. Determine how many Cub Scouts and parents could fit in the space and develop a time schedule, if needed, to keep the workshop from being overcrowded.
OR
Ask parents in the pack if anyone has some of the tools below and would be willing to bring them to a location to conduct a build day. This would allow several cars to be worked on at once.
OR
Check with your local Scout Shop. Some Scout Shops will conduct Pinewood Derby build days.
Only adults may use power tools in Cub Scouting. Adults who are using power tools must wear appropriate safety gear including eye protection and ear protection.
Cutting out the basic shape of a Pinewood Derby car is easily done with a band saw or a scroll saw.
A build day is longer than a typical meeting. Cutting out cars, painting them, allowing them to dry, and assembling them will take hours based on the number of power tools available and the number of Cub Scouts in the den or pack.
Before the meeting:
During the meeting:
Tip: Make sure the axles are square, at a 90-degree angle. This will keep the car straight when going down the track. If the axles are not square, the car may want to turn and rub up against the track causing it to slow down. Test the car by simply pushing it across the floor to see if it goes straight.
Den or pack provides a build day for Cub Scouts.
A build day is longer than a typical meeting. Painting the boats, allowing them to dry, and assembling them will take hours based on the dry time of the paint.
Before the meeting:
During the meeting:
Tip: Add wax to the bottom of the boat, the hull, to make it extra smooth. The smoother the hull, the faster the boat can go.
Learn the rules of the Pinewood Derby with a game of Connect Four.
Before the meeting:
During the meeting:
Learn the rules of the Raingutter Regatta with a game of Connect Four.
Before the meeting:
During the meeting:
Cub Scouts help out on pack build day.
A build day is longer than a typical meeting. For the Pinewood Derby, this means cutting out cars, painting them, allowing them to dry, and assembling them will take hours based on the number of power tools available and the number of Cub Scouts in the den or pack.
For the Raingutter Regatta, this means painting the boats, allowing them to dry, and assembling them will take hours based on the dry time of the paint. See Requirement 1 for Build Day information.
Before the meeting:
During the meeting:
After the event:
Tip: The patrol will need time to build a vehicle too. A staggered volunteer sign-up might work out for this event so the Cub Scouts can volunteer to help but also have time to build.
Arrow of Light Cub Scouts teach younger Cub Scouts how to display good sportsmanship.
Before the meeting:
During the meeting:
On race day:
After the event:
Arrow of Light Cub Scouts teach younger Cub Scouts how to display good sportsmanship.
Before the meeting:
During the meeting:
On race day:
After the event:
Cub Scouts help out at the vehicle check-in event.
It is important to check in with your pack committee to understand how the pack runs the check-in and areas for which the Cub Scouts could best help. Vehicle check-in typically requires the race participants list their name, rank, and den.
For the Pinewood Derby, check-in volunteers, give the vehicle a number, weigh the car, measure the length, check the wheel and axles to ensure it meets the qualifications.
Check with your pack for any check-in procedures for the Raingutter Regatta.
Before the meeting:
During the Check-In:
After the event:
Cub Scouts discuss good sportsmanship and how to demonstrate it during their racing event.
During the meeting:
Conduct a Pinewood Derby car race.
This supply list is not all-inclusive. Your Cub Scout pack may include additional items such as food, drinks, special guests, special races, or a “pit stop” that has tools for Cub Scouts to make any last-minute repairs if their car breaks.
These directions are not all-inclusive. Some packs make their Pinewood Derby race a stand-alone event with food and entertainment. Additional directions may be constructed by your pack based on how your pack conducts the race.
Before the meeting :
During the meeting:
Scouting Magazine: 20 tips for planning and hosting the best Pinewood Derby
Conduct a Raingutter Regatta.
This supply list is not an all-inclusive list. Your Cub Scout Pack may include additional items such as food, drinks, special guests, special races, or may make this part of a larger pack event.
These directions are not all-inclusive. Some packs make their Raingutter Regatta a stand-alone event with food and entertainment. Additional directions should be constructed by your pack based on how your pack conducts the regatta.
Before the meeting :
During the meeting:
Raingutter Regatta Raceway plans
Scout Shop blog “5 Simple Tips to Help Cub Scouts Get Ready for the Raingutter Regatta“
Scout Shop Raingutter Regatta Inflatable Raceway
Cub Scouts swim for the BSA swimmer test.
Cub Scouts must successfully pass the BSA Swimmer Test before working on requirement 6 or requirement 7.
Before the meeting:
During the meeting:
Cub Scouts pick from one of the paddle crafts to complete remaining requirements.
During the meeting:
Tip: You may limit the voting options depending on what is available.
Cub Scouts review the attributes of being on the water safely.
Before the meeting:
During the meeting:
Cub Scouts learn about life jackets.
Before the meeting:
During the meeting:
Tip: You may want to do this activity at the boating site as they would have life jackets readily available.
Cub Scouts use life jacket in the water.
Before the meeting:
During the meeting:
Cub Scouts practice how to enter and exit a canoe safely.
Before the meeting:
During the meeting:
Tip: This requirement is done at the same time as requirements 7, 8, and 9.
Cub Scouts practice how to enter and exit a kayak safely.
Before the meeting:
During the meeting:
Tip: This requirement is done at the same time as requirement 7, 8, and 9.
Cub Scouts practice how to enter and exit a stand-up paddle board safely.
Before the meeting:
During the meeting:
Tip: This requirement is done at the same time as requirement 7, 8, and 9.
Cub Scouts learn what to do if their canoe tips over.
Before the meeting:
During the meeting:
Tip: This requirement is done at the same time as requirement 6, 8, and 9.
Cub Scouts learn what to do if their kayak tips over.
Before the meeting:
During the meeting:
Tip: This requirement is done at the same time as requirement 6, 8, and 9.
Cub Scouts learn what to do if their paddle board tips over.
Before the meeting:
During the meeting:
Tip: This requirement is done at the same time as requirement 6, 8, and 9.
Cub Scouts pick a canoe paddle and learn how to use it.
Before the meeting:
During the meeting:
Tip: This requirement is done at the same time as requirement 6, 7, and 9.
Cub Scouts pick a kayak paddle and learn how to use it.
Before the meeting:
During the meeting:
Tip: This requirement is done at the same time as requirement 6, 7, and 9.
Cub Scouts pick a stand-up paddle board paddle and learn how to use it.
Before the meeting:
During the meeting:
Tip: This requirement is done at the same time as requirement 6, 7, and 9.
Cub Scouts enjoy 30 minutes of paddle craft activity.
Before the meeting:
During the meeting:
Cub Scouts learn and explain the knife safety rules.
Before the meeting:
During the meeting:
Cub Scouts practice the knife safety circle.
Before the meeting:
During the meeting:
Cub Scouts demonstrate proper care of a kitchen knife.
Before the meeting:
During the meeting:
Cub Scouts practice sharpening their pocketknives.
(It is recommended to use a large whetstone that can be placed on a sturdy surface compared to using a handheld whetstone when teaching how to sharpen a knife. If using handheld whetstones, Scouts wear a protective glove on the hand they use to hold the whetstone with.)
Before the meeting:
During the meeting:
Cub Scouts use a pocketknife to decorate a walking stick.
Before the meeting:
During the meeting:
Cub Scouts use pocketknife to sharpen a stick for marshmallow roasting.
Before the meeting:
During the meeting:
Cub Scouts practice their knife skills by preparing a foil packet meal.
Before the meeting:
During the meeting:
Cub Scouts practice their knife skills by cutting cooked meat.
In this activity Cub Scouts will slice and dice chicken breast. The diced chicken breast is then used to make a chicken salad. You may alter the recipe or choose another dish to make with the diced chicken breast.
Before the meeting:
During the meeting:
Cub Scouts practice their knife skills by cutting various fruits.
Before the meeting:
During the meeting: